Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene, and colloid, etc. and due to the traditional technology only can refine the waste oil to base oil, can’t use directly, so our company is researching the new technology about distilling machine, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operating cost.
Working principle
TY-2 engine oil recycling Equipment for Used Motor Oil adopt physicochemical actions to polymerize, passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regenerate the Waste oil to clean oil, save the component of the oil.
Process
It can convert used black mixed lube oil to yellow base oil. This is the most effective process for lube engine oil recycling, TY vacuum system is to refine waste oil in a batch process. Waste lube oil after pre-treatment will be pumped into a catalyst reactor we will add two kinds of catalyst blend with oil and heat in a distillation kettle under vacuum. As the temperature in the kettle rises, various cuts are liberated and rise as vapors, to be condensed in a condenser. The condensed products are available as different products corresponding to various kettle temperatures
The used black mixed lubricating oil can be converted into yellow base oil. This is the most effective process for lubricating oil recovery, and the TY vacuum system is used to refine waste oil in batches. After the waste lubricating oil is pre-treated, it will be pumped into a catalyst reactor. We will add a mixture of two catalysts, oil and heat in a still under vacuum. As the temperature in the kettle increases, various fractions are released and rise in the form of vapor, condensing in the condenser. Condensation products can provide different products according to different kettle temperatures.
Finally, when the remaining material in the kettle does not evaporate, the process ends even at a temperature of around 350°C. At this time, the heating in the distillation process is stopped, and the process is basically completed.
It adopts advanced vacuum distillation technology, which is different from the traditional sulfuric acid and flocculation processes. The traditional process uses sulfuric acid, water glass (Na2O.mSiO2, 1%), TEPA (tetraethylenepentamine) C8H23N5, 1-2%) and activated clay (25%) to treat waste engine oil. These additives are expensive and difficult to buy.
Advantages of engine oil recycling machine:
- Low cost, the cost of refining one ton of waste engine oil is 30 US dollars 2.
The operation is simple and the operation cost is low. Only 1-2 workers can control the machine.
- This machine can recycle gasoline engine oil, diesel engine oil, various engine oil, and other lubricating oil cleaning oil.
- Environmental protection. This machine is fully enclosed, the machine does not have any harmful odors, colloids, oxides, acids, and asphalt will be converted into sludge, which can be used as asphalt and fuel.
The high recovery rate of 5.85%. This includes 6-8% diesel and gasoline blends, 80-85% base oil, and 8-10% sludge.
- Efficient vacuum system
- High-quality refined oil, no oxidative discoloration, no peculiar smell.
If you need a high-quality engine oil recycling machine, please contact us and we will choose the engine oil recycling machine suitable for your factory.
